Pond Construction » bottom drains » Large sump bottom drain 110 m

Large sump bottom drain 110 m
Large sump bottom drain Large Sump Bottom Drain For installation at lowest point of pond. A must for gravity fed systems. Ideally suited for draining heaver particles to waste or filter system. Can be reduced down to 3” if required. 4” (110 mm) exhaust. When installing plastic fittings into cement or brickwork, you can achieve a good bond between the plastic and the mortar mix by heavily covering the surfaces that will be in contact with the mortar in solvent glue. While the glue is still wet smother it in sand. The glue will partially dissolve the surface, permanently biding the sand into the surface of the plastic. Once dry (allow at least 24 hours), this will provide an idea surface for the mortar to bind to.
You might also be interested in the following items or information: Solvent Weld Pipe Non Return Valves Valterra Slide Valves Nexus Eazy 200/2000